Dither in Ableton Live: which export option should you pick?
Use dither only when you export at a lower bit depth than you mixed at, which in practice means 16-bit files. Pick Triangular for a safe default or POW-r for a final 16-bit master, and apply it once, on the very last export. For 24-bit or 32-bit float files, dither doesn't matter.
What dither is
Live works in 32-bit floating point inside. When you export a 16-bit file, every sample has to be rounded to one of 65,536 levels. In very quiet parts, like fade-outs and reverb tails, that rounding creates a gritty kind of distortion. Dither adds a tiny amount of noise before rounding, which turns that distortion into a very quiet, smooth hiss you won't notice.
Which option to choose
In Live's export dialog, the dither options appear when you export at a fixed bit depth:
- No Dither: for 32-bit float files, and for 24-bit stems that will be processed further.
- Rectangular: the lightest noise, slightly less effective. Rarely the best choice.
- Triangular: the standard, safe choice for 16-bit files.
- POW-r 1, 2, 3: noise-shaped dither that pushes the noise into frequencies ears hear less. Good for a final 16-bit master; POW-r 1 is the gentlest, 3 the most shaped.
Rules of thumb
- Dither once, at the end. Dithering a file that gets dithered again later just stacks noise.
- Stems for mixing or mastering: export 24-bit or 32-bit float without dither.
- Final master for streaming: upload 24-bit if the distributor accepts it (no dither needed); if it must be 16-bit, use Triangular or POW-r.
- Don't normalize after dithering. Turning the file up afterwards raises the dither noise too.
ELXR