Classic trance gate patterns, step by step
Most trance gates are 16 steps per bar. Write them as x for on and · for off. Start with the classic x·xx·xx·x·xx·x·x, then try the off-beat, the gallop and the stutter-end patterns below, with a little smoothing so the steps don't click.
How to read the charts
Each chart is one bar of 16th notes: lit steps = sound on, dark steps = sound off, and the numbers mark the four beats. Under each chart the same pattern is written as text (x = on, · = off). Copy them into any gate device, a step sequencer, or volume automation on the grid. Put the gate on a sustained sound: a supersaw pad, a held chord or a long stab.
Eight patterns to start with
- Classic. The sound most people mean by "trance gate".
x·xx ·xx· x·xx ·x·x - Straight 8ths. Simple pulse, good under busy leads.
x·x· x·x· x·x· x·x· - Off-beat. Leaves the downbeats for the kick.
·x·x ·x·x ·x·x ·x·x - Gallop. Driving, great on basslines too.
x·xx x·xx x·xx x·xx - Syncopated. Groovy, works at slower tempos.
x··x ··x· x··x ··x· - Long-short. Sounds more like a riff than a chop.
xxx· x·xx xxx· x·x· - Stutter end. Rolls into the next bar, nice every 4th bar.
x·xx ·xx· x·xx xxxx - Half-bar build. Speeds up through the bar, for builds.
x··· x··· x·x· xxxx

Play patterns like these on your own tracks with Rhythmic Gate →
Making them sound right
- Smooth the edges. Hard steps click. A little smoothing keeps them sharp without clicks.
- Add swing. A touch of swing makes 16th gates groove instead of march.
- Gate before the reverb for a lush wash, or after it for a tighter, more obvious chop.
- Change it every 8 bars. Switching between two related patterns keeps a long breakdown moving.
A chart is a starting point, not the answer. Put the classic on your pad, then let the track tell you what it wants. Sometimes the gate should hold back so the lead can speak; sometimes the drop hits hardest with just the gated chord, the kick and the bass. If a pattern keeps fighting you, don't force it: try another one and follow where it goes.
With Rhythmic Gate
Rhythmic Gate starts on a classic trance gate and has 90+ built-in gates, pumps and shapes, so most of the patterns above are one click away. Paint your own with Block, roll a random one with the dice (Complexity sets how busy it is), set Swing and Smooth, and use up to 64 steps for two- or four-bar patterns. Switch to Map and the same pattern drives any knob, like a filter cutoff.
ELXR


