ELXR
SYS.ONLINE--:--:--
elxr / guides / psytrance-bassline-ableton
// Guide · Ableton Live

How to make a psytrance rolling bassline in Ableton Live

// Quick answer

A psytrance bassline plays the three 16th notes between kicks: kick, bass, bass, bass, on every beat, at about 138 to 148 BPM. Short, tight bass notes tuned to the kick, with nothing overlapping, give the rolling drive.

What the roll is

The kick takes the first 16th of every beat and the bass takes the other three. Because they never play at the same moment, both can be loud and the low end stays clean. Press play, then mute the bass to hear how much of the drive it carries.

Kick and clap are real ELXR one-shots; hats, bass and lead are simple synths made in your browser. Tap a step to change the pattern, tap a name to mute it.

Gate one held bass note into a rolling ·xxx pattern with Rhythmic Gate →

Tempo and tuning

  • Tempo: about 138 to 140 BPM for progressive psy, 142 to 148 for full-on.
  • Key: the bass usually sits low, around E to G (about 41 to 49 Hz). Tune the kick's body to the same key so the two sound like one instrument.
  • Note length: each bass note is shorter than a 16th, so there's a gap before the next kick.

Build it in Live

  1. The sound: Operator or Wavetable with one saw or square wave, mono (Voices 1, no unison).
  2. The filter: a 24 dB low-pass with a fast filter envelope: Attack 0, Decay about 80 to 150 ms, Sustain low. The decay sets how punchy each note is.
  3. The notes: draw 16th notes on the second, third and fourth 16th of every beat. Vary velocity or the filter on one of the three to make it bounce.
  4. Or gate one long note: hold a single bass note and put a trance gate on it with the pattern ·xxx on every beat. Changing the gate pattern is faster than redrawing MIDI.
  5. Glue: a little saturation adds harmonics so the bass is heard on small speakers.
Psytrance rolling bass chart at 142 BPM: kick on the first 16th of every beat, bass on the other three
Tap to open the chart full size and save it.

Keeping kick and bass apart

// The feel of it

Listen to the roll as one instrument. When kick and bass are tuned together and never overlap, the low end feels like a single pulse moving forward; if it feels heavy instead of driving, shorten something.

// Listen

Hear the difference

A soft saw pad, then the same loop recorded through Rhythmic Gate in Ableton Live (Trance pattern, Smooth 15 %). Both are matched in loudness, so you hear the change, not just a volume jump. Switch while it plays.

Questions

What BPM is psytrance?

About 138 to 148 BPM: progressive psytrance sits near 138 to 140, full-on around 142 to 148.

What is the psytrance bass pattern called?

The rolling bass, often written KBBB: kick, bass, bass, bass on every beat.

Why does my psytrance bass sound muddy?

Usually the kick tail overlaps the first bass note, or the notes are too long. Shorten both, tune them to the same key, and keep the low end mono.

Rhythmic Gate device in Ableton Live
// The quick way

Rhythmic Gate

Trance gates, pumps and rhythmic volume shapes, synced to Live, in a stock-style device.

// ELXR Bundle · save $61
All 12 devices for $69 $130 →
Add the other 11 devices for $54.